ADE HW 945 Series Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Timbangan ADE HW 945 Series. ADE HW 945 Series 12 halaman. Electronic table scales

Setting the unit counting mode

Attention: If containers are used, please proceed as explained under Tare function.

Once in weighing mode put a reference batch (10, 20, 30 counting parts) on the



platform or container (minimum 1%o of the full capacity) .

Press MODE key



Pcs is indicated and the display shows the reference batch 10.

If the result shown varies from the reference batch press either zero or tare key.



Press mode key subject to pieces put on the platform and reference badge are



identical. You may now start counting process.

Take the object from the platform and press mode key again to return to weighing



mode.

Overload

An overload of the scale is announced by a beeping acoustic signal as well as by EEEEE

appearing overloading objects from the platform. in the display. To avoid any damage of the

scale release overloading objects from the platform.

Underload signal

If the platform cover is removed the beeping acoustic signal is to be heard. The display shows

AdL.

Battery alarm

The scale is equipped by a rechargeable battery. In case the voltage is too low this is indicated

on the display. A 12 hrs loading by using the mains adapter is necessary. The battery symbol

flashes if loading is necessary. A full loading process takes about 12 hours.

CHARGE indication is illuminated (yellow) . Please make sure the scale is in off mode for full

An extreme unloading of the accumulator must be avoided absolutely.

Before cleaning make sure the scale has been disconnected from the socket. For cleaning just

use a damp cloth or common disinfection products. Do not use any aggressive cleaning fluids.

Make sure no water or cleaning fluid penetrates the scale.

HW945-210409-Rev006-UM-en

Cleaning & Maintenance