CBT Supply flipIT RIMLESS Manual Petunjuk Perakitan - Halaman 11

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Desktop CBT Supply flipIT RIMLESS. CBT Supply flipIT RIMLESS 12 halaman. Convertible computer workstation

Halaman Cetak

use 3/8" open end wrench and 5/32" hex

key on the rest with the monitor installed.

Install the gas spring, silver shaft to the long bracket.

Remove locking hub, press end onto post, press in locking

hub. Install monitor.

FIK19R Rimless flipIT ® by SMaRTdesks®

Then remove the monitor to get access to the side adjustments. If necessary, adjust

the left and right pivots using the 5/32" hex key and 7/16" open end wrench.

www.smartdesks.com

Making the lid flush

with the top

The sides will probably be very close, because

you used the work surface as a reference for

the pivots, but the weight of the monitor

compresses the pad in its own way that can't

be simulated on the initial installation.

shaping conferencing & education

800 770 7042

800-770-7042