Datamax H-Class Panduan Memulai Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembuat label Datamax H-Class. Datamax H-Class 12 halaman. Cutter option
Juga untuk Datamax H-Class: Manual (8 halaman), Manual (14 halaman), Manual (10 halaman), Manual (12 halaman)

Datamax H-Class Panduan Memulai Cepat
Selecting Media and Ribbon
Because the media and ribbon used will determine the printer's heat and speed settings, consider these
factors when selecting your thermal transfer stock and ribbon combination:
The combination of label facestocks / topcoatings and ribbon formulation may affect image quality.
The ribbon backcoating can provide printhead protection and, depending upon the formulation, help
reduce static build-up.
The use of a ribbon that is slightly wider than the media backing material (if any) can protect the
printhead against wear.
The following table is for reference only; for detailed advice, consult a Datamax-O'Neil Media
Representative.
Ribbon
Thermal Transfer
Type
GPR Plus
Great Label TTL
Coated and Uncoated Paper,
GPR Plus
Tag Stock, some Films, some
Synthetics
PGR+
Coated and Glossy Paper, Tag
Stock, some Synthetics, Films
SDR
Synthetics, Films
*Highly recommended for optimum print quality at speeds above 10 IPS.
Ribbon Requirements
Ribbon Core:
Maximum Ribbon Length:
[1]
The ribbon width should exceed the web width of the label (label + liner).
Approved Media
Specially formulated for optimum print quality and maximum printhead life, Datamax-O'Neil media and
ribbons are strongly suggested for use in your printer. The use of non-Datamax-O'Neil materials may
affect the print quality, performance, and life of the printer components (see the Operator's Manual
Warranty Statement for details). For a current list of approved media and ribbons, contact a Media
Representative at (407) 523-5650.
Media Type
1.010"
.006" (25.6 mm
to protrude beyond ribbon's edge.
1968 feet (600 meters)
Print Speed
Inches per
Millimeters per
Second
Second
10 – 12 *
254 – 305 *
2 - 10
51 - 254
2 - 8
51 - 203
4 - 6
102 - 152
.2 mm) inner diameter; where the core is not
9
Print
Image
Energy
Durability
Medium
Medium
Medium
Medium
Medium
Medium
High
High