Datamax I-Class Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembuat label Datamax I-Class. Datamax I-Class 6 halaman. Present sensor option
Juga untuk Datamax I-Class: Panduan Pengguna (15 halaman), Panduan Memulai Cepat (4 halaman)
Halaman Cetak
Installing the Present Sensor
Position the Present Sensor in the printer as
shown and rotate the sensor until it snaps into
place
Route the Present Sensor Cable along the
Baseplate and on the inside of the Cable
Guide as shown. Plug the end into the
Options Connector as shown.
Install the Reflective Block by inserting the
top Catch into the Notch on the Tearplate.
Rotate the block downward until it snaps into
place.
Cable
Guide
Baseplate
2
Options
Connector
Present Sensor
Cable