Datamax I-Class Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemindai Datamax I-Class. Datamax I-Class 6 halaman. Present sensor option
Juga untuk Datamax I-Class: Panduan Pengguna (15 halaman), Panduan Memulai Cepat (4 halaman)

Halaman Cetak

Setup and Configuration

The printer will automatically sense the presence of the Present Sensor and allow it to be enabled for

present printing. If you wish to enable the Present Sensor it must be enabled within the menu system. To

'Enable' or 'Disable' the Present Sensor follow the steps below.

 Verify the printer is in the 'Ready Mode'

 Press the

button scroll to 'Printer Options' and press the

button.

 Using the

button scroll to 'Present Sensor'

and press the

button.

 Using the

button scroll to either 'Enable' or

'Disable. Press the

displayed setting, an asterisk will appear to the

left of the setting indicating that it is selected.

 Once you have selected the desired setting

press the

button repeatedly until the 'Save

Changes' message is displayed. Press the

button to save the changes or the

discard the changes.

Note:

The use of the present sensor can also be controlled via software commands from the host.

Note:

If you are unable to get the present sensor to function, some older I-4212 and I-4308 printers

require the main PCB board to be removed and the jumper moved from E2 and E3 to E1 and E2.

button. Using the

button to select the

button to