Datapath ALIGO QTX100 Panduan Memulai Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penerima Datapath ALIGO QTX100. Datapath ALIGO QTX100 12 halaman.
Juga untuk Datapath ALIGO QTX100: Panduan Memulai Cepat (7 halaman)
Halaman CetakAligo Quick Start Guide
LED'S
The green power LED indicates that the device is connected to a power supply and is
Power
switched on. Amber power LED means power is available, but board is switched off
(RX100 only).
Off - The device is still powering up.
Flashing on/off - Indicates the device has booted correctly (occurs approximately
30 seconds after power on) but it is not currently registered with the active
Link
Aetria Network Manager server.
Solid on - Indicates that the device has booted and the device is currently registered
by the active Aetria Network Manager server.
Flashing on/off - Indicates that no stable video has been received/transmitted since
last power on.
Off - Indicates that no stable video is currently being received/transmitted, but video has
Video
previously been received/transmitted on one or more channels since the last power on.
Solid on - Indicates that a stable video source on one or more channels has been locked
onto by the device and transmitted out onto the network (TX) / received from the network
and output to HDMI sink (RX).
The Aligo QTX100 and Aligo RX100 have LEDs on the 10G ports to indicate that each
10G Ports
network channel has good stable power.
8