Datapath Arqa TX1/C Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penerima Datapath Arqa TX1/C. Datapath Arqa TX1/C 12 halaman.

Arqa Quick Start Guide

Single point-to-point connection

Screen, Keyboard & Mouse

Arqa RX1

Switching System connections

Screen, Keyboard

& Mouse

Arqa RX1

Screen, Keyboard

& Mouse

Arqa RX1

STEP 3 OPERATION

Start up a point-to-point connection (without a network switch)

The start up for a point-to-point connection is the same whether you are using the Copper

or Fiber version of the Datapath Arqa.

Ensure all connections between the PC, Arqa TX1 and the RX1 are sound.

Turn on the PC and both monitors.

Both units will start an initialisation process indicated by the red status LED flashing for

a few seconds, then turning solid Green.

Press the Scroll Key on your keyboard five times in quick succession to open the

On Screen Display menu then enter 'P' to enable Point-to-Point mode.

The monitor will display the desktop of the PC and any open applications.

Distance up to 150m Copper / up to 500m - Fiber

Screen, Keyboard

& Mouse

Arqa RX1

Screen, Keyboard

& Mouse

Network Manager Server

Arqa RX1

Network

Switch

Up to 2000

Arqa TX1

Endpoints

Arqa TX1