Dataprobe IP-415 - Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Beralih Dataprobe IP-415 -. Dataprobe IP-415 - 17 halaman. Web controlled power switches

iPAL

Expansion Connection

This connection provides for expansion to eight controlled outlets with the addition of model K-415 or K-410 and cable

1940044. Expansion can also be to individual power modules like the K-10-IEC, K-12A or K-30A using cable 1940045.

The Control interface is a contact closure (form A) and can be used with any system that responds to a relay. The Common

for all control and feedback is connected to ground.

iP-415

K-415

iP-415

Pin No

Description

Control 5

Control 6

Control 7

Control 8

Control Common / Feedback Ground

Feedback 5

Feedback 6

Feedback 7

Feedback 8

For more information on use of feedback, contact Dataprobe Technical Support:

A/C Power Connections

The iP-820 & iP-420 provide a linecord for connection to a 20 Amp 115VAC service. The total maximum current load for all

outlets on the iP-820 or iP-420 cannot exceed 16 Amps.

The iP-815 & iP-415 provide a linecord for connection to a 15 Amp 115VAC service. The total maximum current load for all

outlets on the iP-815 or iP-415 cannot exceed 12 Amps.

The iP-810 & iP-410 are for international applications and can be set for use on 115V or 230VAC. The iP-810 & iP-410

provide an IEC 320 style universal inlet for connecting a detachable power cord. A standard IEC to NEMA 5-15 cord set is

supplied with the unit for use on 15 Amp 115VAC service. The total maximum current load for all outlets cannot exceed 12

Amps at 115VAC or 10 Amps when used at 230VAC

* 4 Outlet versions only *

Cable 1940044

Cable 1940045

K-12A

or 201-967-8788.

Page 5