Aurus PN-16 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kunci Aurus PN-16. Aurus PN-16 5 halaman. Pin cabinet lock

B. Getting Started

Please insert one button 3V Cr2032 cell

The product will be given to you in demo mode: - the default password "1234 + ok" and default

management password is "4321+OK".

C. Lock and unlock

For the first time please input the default factory password "1234+ OK" or default



management password is "4321+OK".

 You will hear a beep and the green LED

 Within 3 sec rotate the lock 90 degree towards right to open the lock.

 To lock it gain you just need to rotate the lock back to its original Position.

Note: - in case of wrong password, you will hear 3 beeps signaling the wrong passwords.

In case of low voltage/battery the lock show this sign

When you enter the management password to unlock, the default password will be

changed back to "1234"

D. Change password.

 Input the current password "1234 + OK" or default management password "4321+OK".

 You will hear a beep and the green light



Press "OK" for at least 3 sec.



The unlocking indicator



After you input the new pin , press "Ok"



You will hear a beep implying that you have successfully changed the password.



Verify the working with the new password while the drawer/cabinet is open.

IMP: - Check the locking and unlocking of the lock while the

DRAWER/CABINET IS OPEN.

Please note: - The Pin should be consisted of 4-15 digits. Management

password and user password cannot be the same.

flashes.

flashes quickly

will start flashing and now you are ready to enter the new pin.