DUZ iMD-1000T Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering DUZ iMD-1000T. DUZ iMD-1000T 2 halaman. Premium hands free dryer
Halaman Cetak5. Name & Function of Components
Dryer Body
Power On/Off Icon
Air Flow Control Icon
Temperature Control Icon
Hose Connecting Adaptor
Control Buttons
Description of Function
ON/OFF repeated with touching of Power Supply Icon.
Automatically turns off after 30 min. operation.
Adjustable Air Flow : Low, Med, High
(3 steps repeating Low Med High)
Adjustable Temperature Low, Med, High, Cool
(4 steps repeating Low Med High Cool)
6. Main Unit Mounting Procedure
Wall Mounting Using Frame
Wall Plug
Fix the Wall Mounting Frame on the wall with
screws
screws, install the product inserting
at the groove provided on the rear side of
Main Unit, and use.
Wall Mounting Frame
7. Use of Base Plate
※ Normal Assembling
※ Hose direction may be
Procedure
adjustable as necessary
when assembling the Main Unit
to Base Plate.
8. Troubleshooting Procedure
□ No power is supplied.
□ Warm Air is abnormally hot.
- Check if there is power outage around.
- Check if the Air Flow Inlet is clogged
- Make sure the dryer voltage equals
with hair or other stuffs.
the same voltage as home or office.
- Remove hair or dust attached
on the Air Flow Inlet.
Mounting Base Plate
Air Inlet
Air Outlet Adaptor
Flexible Hose
Main Unit Fixing System
2.4
Mounting
Base
Plate
6.3
7
Wall-
hanging
Kit
2.8
9.4
Actual Dimension of Product
(Unit: inch)
Mounting Base Plate
Use the non-slip rubber plate to
fix the body and safely use the product.
Non-slip Rubber Plate
※ If the dryer is not properly fitted to
Base Plate for electric wire groove
at rear side, it may cause damage of
power wire after repeated use of
product.
□ When hose is separated.
- Engaging excessive force may cause
the separation of Hose.
- Fit and insert the Hose starting from
the loosened section.
- Add a little heat on the Hose for easy work.
9. Operation Procedure
Power On
◎ Insert the Power Supply Plug into power receptacle. Touch the Power
Supply Icon to activate the product. Set the desired air flow &
temperature up using the Air Flow and Heater Icons.
◎ Turning the power supply ON will automatically activate the Timer,
turning Unit OFF after 30 minutes.
Flexible Expandable Hose
◎ When using the product for the first time, hose may be stiff.
Engage heat with heater on the hose of product for smooth operation,
and use the product by moving left & right for easy operation.
◎ The Flexible Hose of product is pliable, which may be bent as shown
on the below Figure 1 & 2. Fold the direction of Hose in the order of
below figure to obtain desired Hose shape. (Figure 2)
◎ The hose length is extendable by approximately 1.5 times for
desired distance. (Refer to the below figure.) Either extend or shorten
the length of hose by pulling in or out of the Hose. Flexible Hose
can be freely bent, allowing fixing of hose at a desired location.
◎ When the connecting force between Hose and Air Outlet Adaptor
is loosened, engage heat on the Hose with heater, and twist the end of
Hose holding with both hands to add the connecting force as
the external diameter is increased.
◎ Pay attention to tenderly mover the product to side as engaging
excessive force on Hose to bend when using the product may cause
trouble. (Figure 4)
◎ Separate the Air Outlet Adaptor, and use to obtain stronger air flow.
Figure 1
Figure 2
③
①
②
Figure 3
Figure 4
In case of installation,
in the downward
In case of separating,
in the upward
10. Product Specifications
Product Name
DUZ Hands Free Dryer
Model Name
iMD-1000T
Voltage Rating
AC 120V, 50/60Hz
Air Flow Control
1, 2, 3 steps
Safety Device
Double protection electric & temp.
Mounting
◎ When using the product by mounting the Dryer on the wall, install
the product at the chest of person tallest among the family for
convenience of whole family members.
◎ When mounting on wall, fit the product to 4 grooves. Tap the top of
product to fix, or tap it up from the bottom to separate. (Figure 3)
◎ The Main Unit of Dryer can be rotated to the side by 90° for the desired
condition of use(Refer to the under the figure).
Temperature
◎ Use of hot air may present a risk of vaporizing moisture required to
the scalp and cause early loss of hair. (Recommend to use with cool air
or low temperature as much as possible.)
◎ Using of product with warm air(1~2 steps) which is not too hot
compared to other devices is ideal for drying of pet animals.
◎ The product operates with 113℉ at Low, 140℉ at Medium, 161.6℉~
179.6℉ at High, under 77℉ room temperature condition with heat OFF.
※ (Values measured are of average, which may vary a little bit subject to
each products. ±37.4℉)
◎ Digital PWM (Pulse Width Modulation) control system using MCU
as built in the product for control of air flow and temperature allows the
operation at convenience of user' s own choice.
Length Adjusting
Rotation Adjusting
Example
Example
Dimension
7x7x2.4
(unit : inch, dryer body)
Power Consumption
900W
Temperature Control
1, 2, 3 steps, Cool
Weight
2.6 lb
(Incl. base)