DV Mark DV MICRO 50 JAZZ Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Alat Musik DV Mark DV MICRO 50 JAZZ. DV Mark DV MICRO 50 JAZZ 11 halaman.

10) AC POWER SOCKET

Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user

or damage to the unit

11) VOLTAGE SELECTOR The DV MICRO heads feature a 120V/240V Voltage Selector to use the amp in countries with different voltages,

so make sure the switch on the rear panel is on the correct voltage before connecting it to the AC power, and the fuse is the right value for that

voltage (not available on the 100V version manufactured for Japan).

Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you need to change the

voltage of the unit.

12) FSW

1/4" MONO jack for connecting a SINGLE

footswitch to turn ON/OFF the reverb

13/14) SEND/RETURN

The send/returncan be

used for connecting with outboard effect processors

or pedals. Simply connect the Send out to your pro-

cessor's input, and connect the output of your pro-

cessor to the Return in.

15) SPEAKER OUT

The two speaker ouputs pro-

vided for speaker cabinet connections are wired in parallel and total minimum impedance load for the amp is 4 ohms, so you can connect one or two

8 ohms speakers or only one 4 ohms speaker.

Use speaker cable (not instrument cable)..

DV MICRO 50

REAR PANEL

VOLTAGE

FSW

JAZZ

- DV MICRO 50 JAZZ

RETURN

SEND

CLASS 2 WIRING

SPEAKER OUT

MIN LOAD 4Ω