ADE M10614 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Timbangan ADE M10614. ADE M10614 7 halaman. Electronical babyscale

ADE M10614 Panduan Pengoperasian

Weighing

-
Choose weighing mode first. There is a slide switch for kg/lb/oz in the bottom of the scale.
To select kg unit, please push the switch upward For lb,oz unit, just push it downward.
-
Press button CLOCK/WEIGHT and switch into weighing mode. If you are in kg weighing mode
display shows first ‚8888' to define the zero point automatically. As soon as the scale comes to
`0.00´ weighing procedure can be started.
Put the baby on the tray. The scale will display the weight of the baby.
To return to time mode press Clock/ Weight button.

Memory function

As soon as the weighing result is stable press MEMORY key, display will flash twice and the data will
be stored. The stored data will remain stored until the next data is stored (which includes weight and
time mode.)

Recall function

Press RECALL key. Display will recall the stored data. Display sequences will be weight followed by
date followed by time. The data can be always recalled both in time mode and weight mode.

Weight difference

Being in weight mode another weighing procedure has been done.
Press DIFFERENCE button and the display will show the weight difference compared to last weighing.
Display sequences will be weight difference followed by date followed by time.
(Weight difference could also be a negative value!!)

Tare function

Make sure you are in weighing mode. Any object that you might like NOT to influence the weighing
result (e.g. nappy, towel, paper) you may place on the tray to put these weights under TARE.
Put objects on the tray, press TARE button and after the display is showing `0.00´ put the baby on the
tray. The scale will only indicate the weight of the baby.

Hold function

-
Make sure you are in weighing mode
-
Before putting the baby on the tray for weighing press ADJ/HOLD button.
-
Put the baby on the tray
-
Before weight is stable, the arrow will keep flashing. Once the weight is stable the display will
show and HOLD.
-
Even if the baby has been taken from the tray the result is still displayed
for taking notes.
To disable HOLD function press ADJ/HOLD button.

Weighing Toddlers

Toddlers being already able to stand on the scale can also be weighed up to a maximum capacity of
20 kg. Just slide the baby tray away from the platform and store in a safe place.
Place the weighing platform on an even and safe ground before you start weighing the toddler.
050100-Rev000-M10614
4