DataShark PA70081 Buku Petunjuk
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Uji DataShark PA70081. DataShark PA70081 2 halaman. Hdmi cable tester
INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
PA70081
HDMI
Cable Tester
®
Contrôleur
de câbles HDMI
®
Verificador
de cables HDMI
®
52059357
© 2011 Greenlee Textron Inc.
Register this product at www.greenlee.com
Enregistrez votre produit en ligne, www.greenlee.com
Registre este producto en www.greenlee.com
Description
The PA70081 HDMI
Cable Tester is designed to check
®
and troubleshoot the pin connections of HDMI
definition multimedia interface) cables. It is ideal for
testing the continuity of each pin of an HDMI
prior to installation on equipment.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This instruction manual is intended to familiarize all
personnel with the safe operation and maintenance
procedures for the PA70081.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
HDMI is a registered trademark of HDMI Licensing, LLC.
5/11
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
Important Safety Information
Electric shock hazard:
Contact with live circuits could result in
severe injury or death.
Disconnect cord from electronic equipment before
testing with this tool.
Failure to observe this precaution may cause damage
to electronic equipment.
Features
• Test all signal pins of HDMI
®
(high
• LED indicator on both master unit and remote unit
• Automatic ON and easy to operate
cable
®
HDMI
LED
LED Name
Pin
1
1
Data Red
2
3
4
2
Data Green
5
6
7
3
Data Blue
8
9
10
4
Clock
11
12
5
CEC
13
14
6
SCL
15
7
SDA
16
17
8
+5 Volts
18
9
Hot Plug
19
Specifications
Port Type: HDMI (A)
Battery: 9 V
Operation
1. Install a 9 V battery into the master unit.
2. Connect one end of the HDMI
unit, and the other end to the remote unit.
Test Results
• If all nine LEDs light up, the cable is defined as pass.
Note: This tester is only suited for continuity tests. It
does not indicate intercross issues or response time
issues on cables or connections.
• If any LED does not light up, the cable is defined as
failed.
cables
®
®
Signal
TMDS Data2+
TMDS Data2 Shield
TMDS Data2–
TMDS Data1+
TMDS Data1 Shield
TMDS Data1–
TMDS Data0+
TMDS Data0 Shield
TMDS Data0–
TMDS Clock+
TMDS Clock Shield
TMDS Clock–
CEC
Reserved
(N.C. on device)
SCL
SDA
DDC/CEC Ground
+5V
Hot Plug Detect
cable to the master
®
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company • Greenlee Textron Inc. is a subsidiary of Textron Inc.
USA
Tel: 800-435-0786
Fax: 800-451-2632
www.greenlee.com
Canada
International
Tel: 800-435-0786
Tel: +1-815-397-7070
Fax: 800-524-2853
Fax: +1-815-397-9247