DV8 OFFROAD FBDR1-05 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil DV8 OFFROAD FBDR1-05. DV8 OFFROAD FBDR1-05 13 halaman. Steel front winch bumper 2019+ dodge ram 1500

Halaman Cetak

INSTALLATION

MANUAL

STEP 25 |

Double check fitment

and alignment of the wings against the

bumper/body.

If everything fits well, finish securing the

hardware from steps 22, 23, and 24 in

that order.

If adjustment is needed, make necessary

adjustments before securing hardware.

It may be necessary to loosen up the

hardware securing the wings to the

bumper, and wing support brackets more

before making adjustments.

You may also try removing the wing

support bracket and installing it after the

wings are aligned and secured. Some trail

and error may be necessary for perfection.

STEP 26 |

Reconnect the main

bumper harness by pressing it into place,

then rotating the gray lock to secure it.

Then push the red locking clip back into

place.

Install the remaining sensors into their

bezels by pressing them until they "clip"

into place.

STEP 27 |

Stand back away from the

vehicle and note how it sits on the vehicle.

Check one more time to make sure you

are satisfied with the fitment.

NEED HELP?

855-680-9595