Datasheen D902AS Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Datasheen D902AS. Datasheen D902AS 16 halaman. Adsl2/2+ simple router

3.CONFIGURATION

ADSL MODEM has pre-configured with the following VCI/VPI. The default dial-up mode is bridge

encapsulation. For bridge mode, no need to configure any more parameter. However, the third party dial-up

software is needed for connection with the Internet

The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users can

configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS

server; users need to set the computer's TCP/IP protocol as follow:

1、 Set the computer IP address at same segment of ADSL MODEM，such as set the IP address of the

network card to one of the "192.168.1.2"～ "192.168.1.254".

2、 Set the computer's gateway the same IP address as the ADSL Modem's.

3、 Set computer's DNS server the same as ADSL Modem's IP address or that of an effective DNS server.

Open the browser; input http://192.168.1.1 at the address column. Press "Enter" key then the entry dialog

box will show up as Figure 3.1. Input "username" and "password" (capital sensitive), then press Enter.

Tabel 3.1

Link Name

VCI

pvc_0_32

pvc_8_35

pvc_0_35

pvc_8_81

Figure 3.1

Page 6

Datasheen D902AS User Manual

VPI

Total 16 Pages