DV8 OFFROAD SPEC Series Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil DV8 OFFROAD SPEC Series. DV8 OFFROAD SPEC Series 10 halaman. Rear bumper for 2018+ jeep jl wrangler
Juga untuk DV8 OFFROAD SPEC Series: Panduan Instalasi Produk (10 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (9 halaman)
Halaman Cetak
INSTALLATION
MANUAL
STEP 2 |
Unplug the turn signal
indicator by pulling the red release tab
out and pulling.
STEP 3 |
Use a 10mm socket to
remove the bolt securing the fender to the
vehicle.
Then, remove the fender by pulling away
from the vehicle to release the clips.
Be sure to pull "straight" away from the
vehicle to avoid breaking clips.
Clips will not be re-used, breaking one or
two is normal and nothing to worry about.
STEP 4 |
Use a trim clip tool to
remove the factory clips along the fender.
Repeat process for the other side.
NEED HELP?
855-680-9595