ADE M309800 Panduan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Timbangan ADE M309800. ADE M309800 16 halaman. Mechanical floor scales

This symbol means: "Consult operating instructions". To achieve accurate

results, read the instructions for use carefully before use and follow all

instructions provided therein. Keep the instructions for use for future reference.

Your mechanical scale made by ADE is a precision instrument and must be treated

accordingly. Please follow the instructions below in order to obtain the best results at all times.

– Mechanical round-dial scale

– Operating manual

– Handle your scale with care - it is a precision instrument.

– Use the scale on a firm and level surface

– Operate the unit only within the permissible ambient conditions.

– Do not operate the unit in hazardous or unstable environments.

– Clean with a dry cloth, do not use harsh cleaning agents.

– Do not immerse the appliance in water or other liquids.

Before you can use the scale for the first time, you must adjust the zero point manually.

– Place the scale on a flat and solid surface.

– After transport and setting up, the movable parts of the scale must first move to their

respective initial positions. You can accomplish that by operating the scale and stepping

onto the platform and down again several times.

– For setting the zero point, however, the platform must be clear.

– Adjust the scale by turning the dial above the display to the left or right until the pointer

on the dial points exactly to zero.

– The scale is ready for operation now.

You should repeat the procedure from time to time so you can be sure that

you always get the best results. Proceed as described above. This is

particularly important whenever you move the instrument to a new place /

different surface.

General

M309800-210705-Rev003-UM-de-e-fr-it