AusPress VETEC SPM24 Buku Petunjuk - Halaman 9
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik AusPress VETEC SPM24. AusPress VETEC SPM24 18 halaman. Battery powered hydraulic pressing tool
Halaman Cetak
10.
Instructions for the use of the power pack and battery charger
Th e battery charger has dimensions for 230 V CA 50-60 Hz. Th e new batteries are provided
partially charged and must be charged before the machine is used for the fi rst time. In order to
recharge the battery charger plug must be inserted in a wall socket and the power pack must
be placed in the battery charger. A 1.5 Ah power pack can be recharged in approximately 30
minutes. Th e status of the charge for the power pack is indicated by the luminous diode on the
battery charger.
A
Caution:
When the power pack is not being used keep it away from paper clips, coins,
keys, nails, screws and other small metal objects which could act as contact bridges. A short
circuit between the battery contacts could cause combustion or fi res.
A
Caution:
Do not charge the power pack in the presence of easily infl ammable gas or mate-
rials. After charging, remove the battery charger plug from the wall socket. Do not disas-
semble the battery charger.
A
Caution:
If the power packs are stored for long periods of time, their charge status must
be checked periodically. Th e optimum charge is between 50% and 80%. Th e power packs
should be recharged every 12 months at most to avoid complete discharge which could
cause damage.
A
Caution:
Discharged power packs should not be stored for periods of more than one
month to avoid their complete depletion which could destroy the battery.
A
Caution:
Use only the battery charger advised by the manufacturer. Th e use of a battery
charger suitable for a specifi c type of battery to recharge other batteries are a cause of
danger of fi re.
A
Caution:
Use only the batteries foreseen for the purpose in the tools. Th e use of other bat-
teries could cause injury and the danger of fi re.
A
Caution:
In case of incorrect usage liquid could leak from the battery. Avoid contact with
the liquid. In case of contact with the skin wash with abundant water. Consult a physici-
an if the liquid comes into contact with your eyes. Liquid that has leaked from the battery
may cause irritation to the skin or burns.
Th e charge status can be read by pressing the relative button on the power pack. While do-
ing so the battery may remain in the crimping tool which must be shut
off beforehead, however, and remain shut off for at least one minute
(otherwise the reading will be imprecise). Th e number of illuminated LEDs
indicates the charge status. A fl ashing LED indicates a maximum power
reserve of 10%. Th e purpose of this indication is only to determine whe-
ther there is a reserve of power and how much power the battery still has
available.
BLUSPM24
SPM24
Vetec SPM24
9