DataTale SMART Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan DataTale SMART. DataTale SMART 20 halaman. 2-bay raid system

INTRODUCTION

Thank you for purchasing the DataTale SMART 2-Bay RAID System. The

DataTale SMART RAID System with RAID MASTER (Graphic User Interface)

provides substantial storage capacity and distinctive RAID configuration options

in a desktop storage device. The RAID MASTER allows easy configuration of

RAID Modes: JBOD (None RAID), RAID 0 (Striping), RAID 1 (Mirroring), and

Span (Large).

Please thoroughly read and follow the instructions provided in this manual.

Failure to do so may result in damage to the RAID System, and any or all of the

connected devices.

Compatible with all 3.5-inch SATA I, II, III Hard disks

Connects flexibly via Hi-Speed USB (USB2.0 connection), IEEE 1394a

(FireWire 400), IEEE 1394b (FireWire 800 connection), or eSata (eSATA

connection)

Provides JBOD (None RAID), RAID 0 (Striping), RAID 1 (Mirroring), and

SPAN (Large) for effective storage management

Supports Rebuild under RAID 1 mode

Configures RAID modes easily using RAID MASTER, no IT expertise

required

Monitors System status via LED indicators or RAID MASTER

Combines RAID System and 1394 repeater functionality

Supports over 2TB storage capacity, with no performance degradation

Prevents over-tightened hard disks with auto-limiting segmented screws

Features a trayless function with the SmartGuider*

Dissipates heat efficiently with aluminum housing

Maximizes airflow with a silent fan, SmartGuider*, and well-matched

mechanical design

SmartGuider is a trayless device that utilizes the simplicity of a handle and

screws. The integrated handle is attached onto the hard disk with auto-limiting

segmented screws. Then, the entire hard disk setup can be slide into the RAID

System by aligning the screws with its specially designed guides. This enables

flexibility for easy hard disk removal and insertion.

To use the DataTale SMART RAID System, the minimum system configuration in

the host computer require the following: