DVB CCGX-02 Panduan Instalasi - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil DVB CCGX-02. DVB CCGX-02 7 halaman. Molle center console and bridge 10-21 lexus gx460
Halaman CetakINSTALLATION
MANUAL
STEP 11 |
To use the nutsert tool,
slider the M6 washer and spacer onto
the provided M6x50 bolt with the washer
going on the bolt first.
Then install a nutsert onto the exposed
threads by hand.
STEP 12 |
Slide the nutsert tool with
the nutsert into the mounting hole.
Ensure the flange of the nutsert is flat
against the vehicle prior to tightening.
STEP 13 |
Use a 12mm wrench to
hold the spacer while tightening with
a 10mm socket. Tighten slowly until
the nutsert is set properly. Do not over
tighten.
Nutsert should be "crushed" against the
inside of the trim so that it is tight and
secure. When finished remove the nutsert
tool using a 10mm socket and repeat as
needed.
Note: Be sure to hold the spacer tight so it does
not move and scratch paint.
NEED HELP?
855-680-9595