Aussie Concept F140 Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Cuci Tekanan Aussie Concept F140. Aussie Concept F140 13 halaman. Domestic cold water high pressure cleaner

Aussie Concept F140 Buku Petunjuk

TROUBLESHOOTING

Before starting any work on the machine unplug the power cable, turn off the water supply
and activate the spray gun until the pressure has been relieved completely.
FAULT
Pressure fluctuates or
drops
Motor hums when
switched on but does not
start
Motor will not start when
switched on
Motor stops
No detergent function
Jet is ineffective, ragged,
unsteady, spraying
incorrectly
GRITBLASTING HEADS
Part No. C4716.00.130KIT - Suits F140
DRAIN CLEANING HOSE
CAUSE
Lack of water
Water filter clogged
Nozzle orifice worn
Mains voltage too low
Cross-section of extension
lead to small
Power supply not OK
Mains fuse tripped
Motor thermal overload
protection safety switch
tripped due to motor
overheating
Detergent container is empty
Detergent pick-up body
clogged
Injector clogged
Vario nozzle not set to low-
pressure operation
High pressure nozzle in
spray head clogged

OPTIONAL ACCESSORIES

– to make work easier!
Part No. FTBAP53255
Suits F140
RELIABLE PRODUCTS ... RELIABLE PEOPLE
AUSTRALIAN PUMP INDUSTRIES PTY LTD
7 Gladstone Road, Castle Hill NSW 2154
PO Box 6164, Baulkham Hills Business Park NSW 2153
Ph: (02) 9894 4144
Check water supply; ensure tap is turned on
to max.
Clean water filter
Replace turbo or vario head
Check electrical connection
Use correct dimensions extension lead. See
page 5.
Check plug, cable and switch
Replace mains fuse by qualified electrician
Check that power supply matches appliance
voltage. Wait 20 minutes then switch
machine on again.
Refill detergent container
Clear blockage
Clean injector
Set pressure control to low-pressure
operation
Clean high-pressure nozzle with metal
nozzle cleaner provided
(This part requires lance and connecting nipple when ordering.)
ABN 79 061 619 234
:
www.aussiepumps.com.au
Fax: (02) 9894 4240
REMEDY
ROTARY – Pro-Rotox pro. rotary brush
Suits F140. Part No. C1610.02
(When ordering also order
C1500.05 connecting nipple.)
PRO FIXED - Truck Broom
Suits F140.
Part No. C1610.00
AUSSIE PUMP SAVER - Line Strainer
Suits all units. Part No. MPA28030020P