Datatek DT-6061 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer Datatek DT-6061. Datatek DT-6061 16 halaman. Ip-pad application

Halaman Cetak
5
S
U P P O R T F O R
The IP-PAD supports the relevant X.3 PAD parameters. Since the IP-PAD is not a physical
device, some of the parameters are not readily applicable. Responses via X.29 will carry default
values if queried.
The table below will indicate all the X.3 parameters, and the support of these parameters by the
IP-PAD application.
Ref
Description
#
1
PAD recall
2
Echo
Data Forwarding
3
Characters
4
Idle Delay
5
Ancillary Device
Control
6
Control of PAD service
signals and PAD
command signals.
7
Operation of PAD on
receipt of break from
IP
8
Discard Output
9
Padding after CR
10
Line Folding
11
Binary Speed
12
Flow Control of the
PAD
11/01/00
X . 3 P
P
A D
A R A M E T E R V A L U E S
Supported Options
0 – None
0 – No Echo
1 – Echo
0 – None
2 – CR
126 – All Characters
0-255
0 – None
0 – No PAD service signals
are transmitted.
0 – Nothing
1 – Send X.25 Interrupt
2 – Send X.25 Reset
4 – X.29 "Indication of
Break"
0 – Normal Data Delivery
0 – No Padding after CR
0 – No line folding
18 – 64000bps
0 – No use of X-ON
and X-OFF
Datatek Applications Inc.
Note
User Command session
provided by Datakit CC or
DT-4000 or DT-2020.
th
Ticks are in 1/20
of a
second.
Configured on DT-4000 or
SAM/DT-2020 port
configuration
DT-4000 or SAM is DTE
service center.
For Reporting Only
These are functions of the
DT-4000 and SAM devices.
Config
No
Yes
Yes
Yes
No
No
Yes
No
No
No
No
No
14