Agri-Fab 45-02112 Panduan Pemilik - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyebar Agri-Fab 45-02112. Agri-Fab 45-02112 13 halaman.
Halaman CetakFor Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
9. Assemble a spacer and a 1-5/8" flat washer onto the
end of the axle that has the large hole. See figure 4.
10. Place the drive wheel onto the axle (air valve to outside)
and secure with a 1/4" x 1-3/4" hex bolt and a 1/4" hex
lock nut. See figure 4.
1/4" x 1-3/4"
HEX BOLT
DRIVE WHEEL
1/4" HEX
AIR VALVE
LOCK NUT
FIGURE 4
11. Turn the spreader upright on its wheels.
12. Assemble the hitch bracket to the top of the hitch tube
using two 3/8" x 1-1/4" hex bolts, 3/8" lock washers and
3/8" hex lock nuts. See figure 5.
13. Assemble the hitch pin through the hitch bracket and
the hitch tube and secure with the hair cotter pin. See
figure 5.
HITCH PIN
FIGURE 5
1-5/8" DIA.
FLAT WASHER
SPACER
3/8" x 1-1/4"
HEX BOLT
3/8" LOCK
WASHER
3/8" HEX
LOCK NUT
HAIR COTTER PIN
www.mymowerparts.com
14. Assemble the flow control link (end with small hole) to
the flow control arm using a 1/4" x 3/4" hex bolt, a nylon
washer and a 1/4" hex lock nut as shown in figure 6.
Tighten carefully. The flow control link should not be
loose but should pivot with no more than slight resis-
tance.
FLOW CONTROL
LINK
1/4" x 3/4"
HEX BOLT
SMALLEST
HOLE
NYLON
WASHER
FIGURE 6
5
FLOW
CONTROL
ARM
1/4" HEX
LOCK NUT