Aussie Pumps QP60TDK Series Panduan Pengoperasian & Suku Cadang - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Suku Cadang untuk Pompa Air Aussie Pumps QP60TDK Series. Aussie Pumps QP60TDK Series 20 halaman. Trash pump

Indicator light Indicator
.
No
-
Ignition Key
Battery recharge
indicator light
Coolant water
temp indicator
light
Oil pressure
indicator light
Glow plug heating
indicator light
Emergency stop
button
PAGE 16
Colour
Function
-
To use for engine starting/stopping and glow plug heating
Red
Lights up when the battery is not recharging.
It lights up at "ON" position of ignition, the light should be off while engine
running providing the battery is charging
Red
Lights up when the temperature of the coolant water is abnormally high . (over
heat conditions)
Engine will stop automatically if this lamp lights up.
Red
Lights up when oil pressure is low.
It lights up at "ON" position of ignition, after then it should be off while engine
running providing the oil pressure is not low.
Red
It indicates "pre-heating" time".
It lights up at "GL" position of ignition, after 5 seconds light goes off. *1
After light off, turn ignition to "ST" position. *2
Note;
*1. This step is not necessary if engine is warm enough.
*2. Stay in "GL" position for longer than 5 seconds if ambient temp under –5°C
-
Engine stopped immediately by pushing down button in an emergency.
To release, return the ignition to "OFF" position and turn emergency button in
direction of arrow on button.
QP60TDK SERIES TRASH PUMP• OPERATION AND PARTS MANUAL — REV. #0

INDICATOR LIGHT (CONTROL BOX)

Equipped
apply
apply
apply
apply
apply
apply