DVDO Matrix-42 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengalih Matriks DVDO Matrix-42. DVDO Matrix-42 16 halaman. 4 x 2 4k hdmi matrix switcher

Halaman Cetak

DVDO-Matrix-42 4 x 2 4K HDMI Matrix Switcher User Manual

IR Remote Control

The included remote-control handset can be used to turn on and off a

CEC-enabled display device and to switch the HDMI source for each display

device.

Turn on a CEC-enabled display device

Note:

As the internal battery inside the remote control of our device is packaged



by insulation slice, please remove the insulation slice before use.

Please make sure that the remote is pointed directly at the IR receiver



window.

System Code Switch

The IR Remote provided with the Matrix is shipped in "00" IR system code. In

the event that Remote's IR signal interferes with IR devices, e.g. TV, DVD

player, the Remote can be switched to "4E" code by short pressing the System

Code Switch on the Remote panel. At the same time, you must redefine the IR

system code of the Matrix using the API command.

DVDO-Matrix-42_V1.0.0

Select the previous source input

Select a specific source input

Turn off a CEC-enabled display device

Select the next source input

DVDO