DVDO Switcher-41 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih DVDO Switcher-41. DVDO Switcher-41 12 halaman. 4 x 1 4k@60 444 hdmi switcher

Halaman Cetak
DVDO Switcher-41 Panduan Pengguna
DVDO
Button
IR Codes
0x02 0x0a
0x02 0x08
1
0x02 0x04
2
0x02 0x05
3
0x02 0x06
4
0x02 0x0c
5
N/A
Note: Since the encoding format for IR codes above is NEC (38KHz), please
ensure any third-party device used to IR control the switcher supports NEC
(38KHz).

Automatic Switch Control

The switcher supports automatic switching and allows you to control it without
staying near it or using the IR remote.
When the switcher is powered on, automatic switching will function as follows:
1.
When HDMI sources are inserted, the switcher will switch to the latest
connected source for output display.
2.
When the HDMI source selected is removed, the switcher will switch to the
active source with top priority for output display (Priority: input 1 > input
2 > input 3 > input 4).
Note: Automatic Switching function can only detect 5V of the input source
device. If the selected HDMI source in standby mode provides a continuous 5V
power output, the Automatic Switching function will not work, i.e. the switcher
will not switch the input to other active sources. In this case, please turn off the
standby source device selected or remove it from the switcher.
DVDO-Switcher-41 4 x 1 4K@60 444 HDMI Switcher User Manual
Description
Switch to next active source input (Cycle 14).
Switch to previous active source input (Cycle
41).
Switch to source input 1.
Switch to source input 2.
Switch to source input 3.
Switch to source input 4.
Not available.
9
DVDO-Switcher-41_V1.0.0