Aussie Pumps Eco Clean Super Indy Petunjuk Pengoperasian & Pemeliharaan - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian & Pemeliharaan untuk Pembersih Perhiasan Ultrasonik Aussie Pumps Eco Clean Super Indy. Aussie Pumps Eco Clean Super Indy 20 halaman. High pressure washer

Halaman Cetak

OPERATIONS FOR USING

ANTIFREEZE (fig. 13)

1) Turn off the water supply

(tap), disconnect the hose

and run the cleaner until it is

completely empty.

2) Stop the water cleaner with

the ON/OFF switch in the "O"

position.

3) Prepare a container with the

solution of antifreeze.

4) Immerse the tube in the

container with the anti-freeze

solution.

5) Start the water cleaner with

the ON/OFF switch in the "I"

position.

6) Start the cleaner and let it

run until antifreeze comes out

through the lance.

7) Suck up antifreeze with the

detergent intake system too.

Disconnect the water clea-

ner from the mains electricity

supply via the omnipolar

switch or by unplugging the

plug from the socket.

9) For high pressure cleaners

provided with water tank, the

detergent solution prepared

as described in the point 3,

must be poured directly into

the tank.

CHECKING PUMP OIL

LEVEL AND OIL CHANGE

From time to time check the

oil level in the high pressure

pump by means of the sight

glass (fig. 14A) or the dipstick

(fig. 14B).

If the oil has a milky

appearan-ce, call the

technical service centre

immediately. Change the oil

after the first 50 hours' work

and subse-quently every 500

hours or once a year.

Proceed as follows:

1) Unscrew the drain cap

situated under the pump (fig.

15C).

2) Unscrew the cap with the

dipstick (fig. 14B).

3) Let all the oil drain off into

a container and deliver it to an

authorized oil collection and

disposal centre.

4) Replace the drain screw

and pour fresh oil in through

the filling cap on top (fig.

15A) until it reaches the level

indicated on the sight glass

(fig. 15B).

Use only SAE 15 W40 oil.

FIG.13

Anti-freeze may cause

environmental pollution.

Always follow the instructions

given on the pack. (Dispose

of carefully.)

For water cleaners with-

out oil drain bung, contact our

technical service centre for

replacement.

FIG.14

FIG.15

Aussie Eco-Clean Super Indy Operating & Maintenance Manual - 2020

CLEANING THE FUEL FIL-

TER AND TANK

Remove and replace the in-

line fuel filter (fig. 16).

Change it from time to time.

Empty the fuel tank.

Open the drain cap (fig. 17) (if

available) and let any impuri-

ties drain out into a container.

Flush out the tank with clean

fuel and close the drain cap.

CLEANING THE WATER

FILTER

Clean the water intake filter

regularly and free it from any

impurities (fig. 18).

CHANGING THE NOZZLE

The high pressure nozzle fitted on the lance must be

changed from time to time, as this component is subject to

normal wear during use. Wear may generally be detected

by a drop in the working pressure of the cleaner. To replace

it, consult your supplier and/or dealer for instructions.

DESCALING

Descaling must be carried out from time to time because the

scale present in the water partially deposits inside the hydraulic

circuit and the coil which with time becomes clogged.

Apply to our technical service centre to have the machine

descaled from time to time; this will save you money and

increase the efficiency of the cleaner.

FIG.16

FIG.17

FIG.18

| 13