AUSSIE TONNEAU ATR01146 Petunjuk Pemasangan - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Aksesori Mobil AUSSIE TONNEAU ATR01146. AUSSIE TONNEAU ATR01146 4 halaman. Continuous rope tonneau cover
Halaman Cetak
2. CARING FOR YOUR TONNEAU
Apply bee's wax or Dri-lube to stitching a few times a year, as this will maintain the tonneau's
-
waterproofing ability and prevent the stitching from degrading. Use a mild detergent and soft
scrubbing brush to clean tonneau.
Never drive without tonneau support bars in place as flapping can cause a delaminating effect
-
on the material.
"Tonneau is not designed to be used as a load restraint"
3. MULTI-FIT SUPPORT BAR
The Aussie Tonneau Multi - Fit Support Bar is designed to fit almost all Utes on the
Market, from Suburu Brumbys to Cab Chassis aluminium trays.
3.1 BASIC TOOL REQUIRED
Drill, 4mm drill bit
3.2 MULTI-FIT SUPPORT BAR CONTENTS
-
1 x hollow bar centrepiece
-
2 x solid bar end piece
-
2 x grub screws
Figure 4
Thread Rope through
each of the eyelets