Datavideo TLM-170G Panduan Memulai Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Monitor Datavideo TLM-170G. Datavideo TLM-170G 16 halaman. 17.3" 3g-sdi tft lcd monitor
Juga untuk Datavideo TLM-170G: Panduan Memulai Cepat (13 halaman), Buku Petunjuk (16 halaman)

Halaman Cetak

Datavideo TLM-170G Panduan Memulai Cepat

Firmware update procedure

From time to time Datavideo may release new firmware to either add new features or fix

reported bugs in the current TLM-170P firmware. Customers can update the DAC-70 firmware

themselves or contact their local dealer for assistance.

This page describes the firmware update process and it should take approximately 15 minutes

of total time to complete.

A working TLM-170P requires the following:

The latest firmware file for the TLM-170P monitor. This can be obtained from your local

Datavideo office or dealer.

A USB 2.0 pen drive (128MB or larger) with a USB A connector.

Once started the update process should not be interrupted in any way as this could result

in a non-responsive unit.

How to update the Scaler firmware

1. Unzip / extract the supplied zipped archive or rar file.

2. Erase the contents of the USB 2.0 pen drive.

3. Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive.

4. Plug the USB 2.0 pen drive into the USB 2.0 port labelled MAINTENANCE located on the

rear panel of the TLM-170P monitor.

5. Power on the monitor and press the MENU button to display the OSD Main Menu.

6. Use the OSD Menu buttons [UP, DOWN & ENTER] to select the SETUP F.W. option.

7. Use the OSD Menu buttons [UP, DOWN & ENTER] to select UPDATE SCALER F.W.

8. The TLM-170P tally light will flash different colours whilst the update is in progress.

9. The TLM-170P monitor reboots itself at the end of the process.

How to update the FPGA firmware