DVIGear DVI-7410 Panduan Memulai Cepat
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penerima DVIGear DVI-7410. DVIGear DVI-7410 2 halaman. Edid manager
Halaman Cetak
DVI IN (PC) Connector
SOURCE CONNECTED LED
DVI SIGNAL DETECT LED
DVI OUT (MONITOR)
MONITOR PRESENT LED
POWER LED
BURN Button
LEARN Button
Status LED
GREEN
RED
GREEN Flashing
RED Flashing
MEMORY ADDRESS
9-12 VDC Power Connector
DVI-7410 EDID MANAGER
Quick Start Guide
EDID manager's DVI input
Connect the DVI source to this connector
Indicates if the connected DVI source is powered
ON (detects presence of +5V signal on DVI IN
connector)
Indicates if a live DVI signal is applied to DVI IN
connector ( detects TMDS Clock channel )
EDID manager's DVI output connector
Connect to sink or display
Indicates if a monitor is attached to the DVI OUT
connector ( detects Hot Plug signal )
Green if the EDID MANAGER is powered ON
Reprograms the attached DVI Matrix switcher's
input EDID data
Stores the attached monitor's EDID data
Three color LED displaying the status of the EDID
Manager
Valid EDID data is selected by rotary switches
Empty memory or invalid EDID is selected
Burn or Learn has been effected successfully
Burn or Learn process failed
Rotary switches for selecting one of 100 EDID
memories
Power input connector, center pin positive. The
connector is protected from reversed polarity.
Firmware version: 1.26