Datavideo MCU-100 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Datavideo MCU-100. Datavideo MCU-100 18 halaman. Multi-camera controllers for panasonic cameras
Juga untuk Datavideo MCU-100: Panduan Memulai Cepat (2 halaman)
Halaman Cetak
Introduction
The Datavideo MCU-100 Controller can be used to remotely set up, from a gallery or OB Van, Panasonic P2
cameras such as the AG-HPX255, AG-HPX371 or AG-HPX600. The MCU-100 can be connected with up to
four Panasonic cameras allowing settings from one camera to be aligned with the other cameras quickly.
With features similar to Panasonic's own AG-EC4G Extension Control Unit the MCU-100 reduces cost,
manpower, equipment, set up time and saves desk space.
That's Datavideo; sharing the value!
To get more value out of this equipment please take a few minutes to read through this manual. This will help
you to familiarise yourself with all the aspects of the MCU-100 control unit.
Features
•
Four RJ-45 connections allow remote set up of up-to four Panasonic cameras.
•
RJ-45 cabling allows unit to be placed up to 300m away from the camera(s).
•
Control of Record and Playback functions.
•
Control of Camera User memory functions.
•
Control of Camera OSD Menu Navigation.
•
Control of Shutter speed and degree functions.
•
Control of Iris adjustment.
•
Control of AWB & ABB functions.
•
Control of White Balance A, B and Preset functions.
•
Control of Camera Knee & Bars functions.
•
Control of Camera Gain adjustment.
•
RGB / R & B gain and Master Pedestal controls.
Compatible Camera Models
AG-HPX255*, AG=HPX302*, AG-HPX371*, AG-HPX372* and AG-HPX600*
*Note: Datavideo have tested and found the above Panasonic cameras to be compatible with the MCU-100
unit. However, due to the differences between individual Panasonic camera models some features or
settings may be limited. In most cases the same limitation also applies to the Panasonic AG-EC4G unit.
5