Datawell BV Waverider DWR-MkIII Panduan Instalasi - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Kelautan Datawell BV Waverider DWR-MkIII. Datawell BV Waverider DWR-MkIII 13 halaman.
Halaman CetakDisplay systems
Computer D1 The computer displays the data of Buoy 1, Buoy 2, Buoy 3, Buoy 4. On
this computer the following parts of the Waves4 suite are installed:
•
Waves4
Computer D2 The computer displays the data of Buoy 1, Buoy 2, Buoy 3, Buoy 4. This
system is also used by the operator of the Waves4 suite. This user configures the
settings of the campaigns in buoyd and waved. On this computer the following parts
of the Waves4 suite are installed:
•
Waves4 configurator
•
Waves4
Computer D3 The computer displays the data of Buoy 1, Buoy 2, Buoy 3, Buoy 4. On
this computer the following parts of the Waves4 suite are installed:
•
Waves4
In this example the HF-receivers are received with two systems. It is also possible to receive
them on a single computer system with one buoyd service running. This depends on whether the
RX-C4 receivers are at one or multiple physical locations. (With Ethernet it is possible to place
the acquisition system at a different location as the RX-C4 receiver, but in case of network
issues data will be lost.)
The system running the waved service is a separate server, it is also possible to put this on an
acquisition machine. It would also be possible to install the Waves4-configurator on this
machine.
For further information, please consult the Waves4 user and operator manual:
http://www.datawell.nl/Support/Documentation/Manuals.aspx
10