Frigidaire FFHI1817LSB Panduan Penggunaan dan Perawatan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Kulkas Frigidaire FFHI1817LSB. Frigidaire FFHI1817LSB 15 halaman.

Tools Necessary:
_sTM
Head
TOp Hinge
over Rear
Screw
Bottom __
Hinge
Screw
The direction in which your
refrigerator doors open (door swing)
can be reversed, from left to right
or right to left, by moving the door
hinges from one side to the other.
Reversing the door swing should be
performed by a qualified person.
Door removal
and reversal instructions:
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a soft
lead pencil. This makes reinstallation
easier. Remove top
hinge and lift door off center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save
for reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator
door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw
and loosening two outside screws enough to allow hinge
and shim to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator,
remove inside screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8" socket wrench.
8. Install bottom hinge on opposite side with the two screws
removed from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Hove hinge
pin to other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instruction on next page).
11. Move freezer and refrigerator
door stops to opposite side.
Before starting screws, use an awl to puncture the foam.
12. Position refrigerator
door onto bottom hinge pin and screw
center hinge pin through center hinge into top of door. Close
refrigerator
door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side
of door while tightening
screws to install top hinge.
17. Flip toe grille and reinstall.
18. Plug in electrical power cord and turn refrigerator temperature
control to center position. Adjust setting as necessary.
Cover
Top
Hinge
Door
Door
Washer
Hinge
Pin
;Center
Door Stop/4//Door
Screw_._"
Stop
ill-"/Wo=hor
/
_
_.,
I
V/Hinge
8o om
_/_-
S"_Hinge
Grile
_________
_iSiiiiii!i