Cooke Water Witch Panduan Instalasi & Pengaturan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi & Pengaturan untuk Peralatan Pencahayaan Cooke Water Witch. Cooke Water Witch 12 halaman. A fully automatic pool and spa water levelling system
Juga untuk Cooke Water Witch: Panduan Instalasi (6 halaman)
Halaman Cetak
6
Once the Water Witch has been mounted properly,
TESTING OF THE WATER WITCH is required. To ensure
that the sensor and solenoid are working properly,
please complete the following steps:
Step 1: Ensure the pool is filled to the operating water
Step 2: Connect the sensor and solenoid plugs to the
Step 3: Turn power and water supplies on. The ON light
Step 4: Holding the sensor upside down, check that the
Step 5: Turn the sensor the right way up and the ON
IF THE WATER DOES COME ON, YOU HAVE CORRECTLY
INSTALLED THE WATER WITCH SYSTEM.
PLEASE FOLLOW STEPS 6 TO 9 TO SET THE SENSOR.
Initial Set Up
Step by step Guide
level required.
control box ensuring that the plugs are
connected as indicated on the label on the
control box (sensor left; solenoid right).
will automatically come on and begin to flash.
Depending on what position the sensor is in, will
determine if the sense light is on and flashing or
the fill light is on.
ON & SENSE lights are flashing approximately
every two seconds.
light will continue to flash and the FILL light will
come on. This will turn the water on to fill the
pool.