4Protect 3854 Panduan Instruksi Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instruksi Pengguna untuk Peralatan Industri 4Protect 3854. 4Protect 3854 18 halaman. Trousers

Warnings: Make a visual check of the garment before use, to verify

it is in perfect conditions, clean and intact and does not show any

damages. In case of visible damages (e.g. unstitched or broken

seams, breaks, flaws) the garment must be replaced. All closing-

elements must be functioning. Kneepads must be insert according to

the Informative Notes of art. 8400. The garment can fulfil the purpose

of protection only, if worn correctly and in sound condition. It must be

stressed out, that the identified technical standards of the PPE might

be impacted by abraison, washing, staining etc.

Alterations of PPE are not allowed. Preserve this user instruction

manual throughout the entire life of PPE. We decline any

responsibility for possible damages and/or consequences arising

from improper use.

Instruction of use: If the garment is damaged, please do NOT

repair, but change to a new one.

Instruction for storage and maintenance and packing: Store in

the original packing, protected from sources of light and heat sources

(e.g. sun). The garment must be preserved in a dry place. Avoid the

contact with solvent which might cause alteration of the products

features. For transportation, do not take garments out of the original

packing, but keep them in.

Care instructions:

Wash at normal temperature (max. 40°C). Apply only reduced

mechanical treatment. Wash with similar colours. Do not bleach, do

not tumble dry, iron on low temperature (max. 110 °C). Do not clean

with solvents. Professional dry-cleaning is not allowed. Any

kneepads must be detached out of knee-pockets before washing the

garment.

The number of washing-cycles is not the only influencing factor of

durability of garments. The life-span is also determined by

usage/application, care/maintenance, disinfection, storage et cetera.

We recommend a usage within 3 years after bringing the product into

service, obeying an appropriate storage and intended use. In case the