Dw Drums DW 9702 Panduan Pemilik

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Rak dan Dudukan Dw Drums DW 9702. Dw Drums DW 9702 2 halaman. Multi stand

Halaman Cetak

DW 9702 MULTI STAND

Remove the stand and all packing materials from the box, then follow these instructions to set up and adjust your stand to fi t the way you play.

Section 1: Leg Assembly and Base Section Adjustments

Section 1.1: Leg Assembly

1. Loosen wingscrew at bottom of base section.

2. Fold legs outward far enough to allow the clamp to contact memory lock. Mega

Base provides larger footprint for increased stability with double-cymbal setups.

3. Tighten wingscrew at top and bottom.

Section 2: Boom Arm Adjustments

Section 2.1: Straight/Boom Casting

DW's Straight/Boom Casting utilizes an exclusive double-sided clamp with one side used

to adjust the distance and balance of the arm and the other controlling its angle. This

casting is also designed to allow the stand to be converted from a boom to a straight

stand by positioning the angle of the arm so that it is vertical and then telescoping it

through the casting and into the top of the upper tube section. To adjust either one of

the positioning adjustments, loosen the respective wingnut on the clamp, position the

arm as desired and retighten the wingnut. New Quick-Release Ratchet opens easily to

accept cymbal arms without moving cymbal arm memory locks.

Section 2.2: Boom Arm

1. Loosen the drumkey screw on the boom arm memory lock.

2. To adjust the distance of the arm, loosen the distance clamp wingnut and position

the arm as desired.

3. Tighten the distance clamp wingnut.

4. Move the boom arm memory lock so that it interlocks with the notch in the top of

the straight/boom casting and tighten the drumkey crew on the memory lock.

Section 3: Tilter and Cymbal Space Adjustments

Section 3.1: Tilter

1. Loosen the TechLock™ on the tilter section.

2. Loosen the Position Reset Handle.

Note: The Position Reset Handle is spring activated. To operate, grasp the handle with

your fi ngers and use your thumb to press on the button in the center of the handle

while pulling the handle away from the tilter. Reset the handle to a more comfortable

position and release.

3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.

4. SM2032 Auxiliary Tilter may be adjusted in the same manner.

Section 3.2: Cymbal Space Adjustment

1. Loosen the drumkey screw on the cymbal seat/cymbal space mechanism.

2. Spin the mechanism to open or close the amount of space between the upper and

lower cymbal felts and the cymbal. Be careful to leave some slack in the spacing as this

will allow the cymbal to sound fuller and prevent cracking.

3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.

Section 4: Memory Labels

Section 4.1: Memory Labels

Eight sets of Memory Labels are included with each 9702 stand. These labels can be

adhered to the upper portion of each stand section and used to identify the parts of

individual stands when multiple stands are separated for transport.

Accessories

SM2035

SM2034

9.5mm arm

Cymbal Tilter

SM2032 "Puppy Bone" Adjustable

SM2030 Counterweight

SM912 Cymbal Arm

Position Reset Handle

Boom Arm Memory Lock

Quick-Release Ratchet

(see inset)

Auxiliary Cymbal Tilter

Tube Memory Lock

9702

Adjustable Cymbal Seat

Boom Arm

Quick-Release Ratchet

Mega Tripod Base

TechLock™