Agri-Fab 45-01772 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Gerobak Luar Ruangan Agri-Fab 45-01772. Agri-Fab 45-01772 8 halaman. Agri-fab 14 cu. ft. farm/yard cart parts list
Juga untuk Agri-Fab 45-01772: Daftar Bagian (1 halaman)

Halaman Cetak

For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983

16. Turn the cart upside down. Place the handle tube

on the bottom of the cart as shown in figure 10.

Place the four tube clamps over the handle tube,

with the longer leg of each tube clamp to the

outside. Secure the four tube clamps over the

handle tube using eight 1/4" x 1" screws, eight flat

washers and eight hex nuts. Make only finger tight

until all eight screws are in place and then tighten

securely. See figure 10.

The length of the handle tube can be

adjusted by sliding the tube in or out

before tightening the four clamps. See

figure 10.

FIGURE 10

NOTE

www.mymowerparts.com

17. Insert a 1/4" x 1" screw through the hole at the rear

of each side panel and the hole at the rear of each

side angle. Secure with 1/4" flat washers and 1/4"

hex nuts, making only finger tight at this time.

See figure 11.

18. Place the tube caps on the ends of the "W" shaped

leg tube. See figure 11.

19. With the cart still upside down, assemble the leg

tube to the bottom of the cart. Line up the two

holes in the center of the leg tube with the holes in

the bottom of the cart. Secure the leg tube to the

bottom of the cart with two 1/4" x 2" screws, 1/4"

flat washers and 1/4" hex nuts. Make only finger

tight at this time. See figure 11.

20. Attach the leg tube to the side panels with four 1/4"

x 2" screws, 1/4" flat washers and 1/4" hex nuts.

Make only finger tight at this time. See figure

11.

21. Fasten the support straps to the leg tube with two

1/4" x 1-1/2" screws, 1/4" flat washers and 1/4"

hex nuts. See figure 11.

22. At this time tighten securely all screws and nuts

assembled in figure 11.

FIGURE 11