Cookology TCH601 Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Cookology TCH601. Cookology TCH601 16 halaman. 60cm ceramic hob black

should match the connection type and the power rating of the ceramic

hob.

The connection cable must be secured in a strain-relief clamp.

Warning!

Remember to connect the safety circuit to the connection box terminal

marked with

.The electricity supply for the ceramic hob must have a

safety switch which

enables the power to be cut off in case of emergency. The distance

between the working contacts of the safety switch must be at least 3mm.

Before connecting the ceramic hob to the power supply it is important to

read the information on the data plate and the connection diagram.

wires for each domino hob with touch control models

Adaptive voltage range and

model

220-240 1N～

AHW-4D-

60-1

 The cable connections must be in accordance with the diagram

located on the bottom of the hob.

 You should use a good quality screwdriver to carefully, fully tighten

ALL of the terminal screws.

 If when the hob is first switched on, only two of the zones work, you

should recheck that the terminal screws are all fully tightened. This

should be done before contacting the Customer Care Department.

 IMPORTANT: The appliance must NOT be connected to the mains

supply by means of a 13A plug and socket.

 This appliance must be wired into a 30 A double pole switched fused

spur outlet, having 3 mm contact separation and placed in an easily

accessible position adjacent to the appliance. It should not be located

above the appliance and no more than 1.25m away from it.

 The cable can be looped if necessary, but make sure that is not kinked

or trapped when the hob is in position. Care must be taken to avoid

the cable being in contact with hot parts of the appliance.

wires

380-415 2N～

50-60Hz

H05VV-F

3G2.5

50-60Hz

4G2.5

The wiring diagram

KADO K 1/5