Agri-Fab SUPER 17 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Gerobak Luar Ruangan Agri-Fab SUPER 17. Agri-Fab SUPER 17 12 halaman. Atv cart
Juga untuk Agri-Fab SUPER 17: Panduan Pemilik (12 halaman)

Halaman Cetak

20. Assemble a short spacer tube, a 1" flat washer, a

wheel (valve stem facing out), and another 1" flat

washer onto the axle. Secure with a cotter pin,

spreading the ends so that a hub cap can fit over

the pin. Assemble the hub cap by pressing it onto

the flat washer. Repeat on other end of axle. See

figure 12.

IMPORTANT: Fill wheel hub with grease after wheel

is assembled onto axle.

SHORT SPACER TUBE

FLAT

WASHER

HUB CAP

COTTER

FIGURE 12

IMPORTANT: Make sure the tongue is securely locked

to the latch stand bracket by the latch lock lever.

21. Turn the cart over so that it rests right side up on

its wheels.

22. Assemble the end of the hitch bracket with two

holes down through the slot at the front of the

drawbar tongue. Fasten it to the tongue using the

3/8" x 1" hex bolt and 3/8" nylock nut. Tighten.

See figure 13.

23. Assemble the hitch pin and 1/2" flat washer to the

tongue and hitch bracket and secure with the 3/32"

hair cotter pin. See figure 13.

HITCH

BRACKET

3/32" HAIR

COTTER

FIGURE 13

24. Place the tailgate down into the tailgate guides so

that the holes in the bottom lip of tailgate fit over

the slotted head screws in the bottom of the cart.

AXLE

FLAT

WASHER

WHEEL

HITCH PIN

1/2" FLAT WASHER

3/8" x 1"

HEX BOLT

3/8" NYLOCK

NUT