AUSTRALIAN MONITOR XRS10W Panduan Instalasi dan Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pembicara AUSTRALIAN MONITOR XRS10W. AUSTRALIAN MONITOR XRS10W 12 halaman. Xrs series powered and passive loudspeakers
Halaman Cetak
XRS8B shown here
XRS8B
2 Way Full Range Speaker
Built-in Passive 2 Way Crossover
Frequency Response (-3dB)
2+
1-
Sensitivity (dB 1W 1m)
Impedance
2-
1+
Recommended Max Power (Program)
1+ 1- : INPUT
SN:
1
1
Speaker Input
The input connector is a 4 pole twist lock, speakON
compatible connector. Pins 1+ and 1- are wired to +ve and
-ve respectively of the speaker. The XRS10 and XRS12 have
two connectors. They are wired in parallel so either connector
can be used as an input, the other as a loop through.
XRS SERIES INSTALLATION AND OPERATION MANUAL
XRS REAR PANEL – PASSIVE AND CONSTANT VOLTAGE
65Hz-18kHz
92 dB
8 Ohm
200W
Made in China
XRS8ODV
XRS8ODV
2 Way Full Range Speaker
Weather Proof 100V/70V
Frequency Response (-3dB)
65Hz-18kHz
Sensitivity (dB 1W 1m)
Impedance
Recommended Max Power (Program)
100V 100W/70V 50W
100V 50W/70V 25W
100V N.C/70V 100W
100V 25W/70V N.C
8 OHM BYPASS
SN:
Made in China
1
2
1
Voltage Tap Select Switch
A switch on the back of the XRS ODV speakers allows
you to select the desired transformer tap. Each speaker
has 3 taps at 70.7 V and 100 V, as well as a low impedance
transformer bypass option.
2
Fly Lead (Speaker Input)
The XRSODV series speakers come supplied with a 2 core
flying lead as input to the speaker. The flying lead wires
are red (positive +) and black (negative -) and are used as
an input to the speaker for both constant voltage and low
impedance inputs
92 dB
8 Ohm
200W
PAGE 5