AUSTRALIAN MONITOR AMIS ZRM4 Informasi Layanan - Halaman 5
Jelajahi secara online atau unduh pdf Informasi Layanan untuk Mixer Musik AUSTRALIAN MONITOR AMIS ZRM4. AUSTRALIAN MONITOR AMIS ZRM4 20 halaman. 6 x 4 routing mixer
Juga untuk AUSTRALIAN MONITOR AMIS ZRM4: Brosur (2 halaman)
Halaman Cetak
FRONT PANEL
1
INPUT CONTROL SECTION
1
OUTPUT ASSIGNMENT
SWITCHES
These four switches allow you to
assign this channel's input signal to
any of the four outputs. When the
input is assigned, the yellow LED
next to the switch will light up.
Any combination of buttons may be
pushed in (selected) at any time, to
select multiple (and therefore mixed),
input signals to any output.
2
TONE CONTROLS
Each input has a two stage shelf EQ.
3
LEVEL
Controls the level of the input signal.
PAGE 4
3
4
2
4
INPUT STATUS LEDS
Each input has a status LED
indicator. The LED is green when
there is signal present and red if the
signal is approaching clip. The LED
begins to light red when the internal
signal level is 6dB before clip and is
solid red when it is 3dB before clip.
Note that the front panel level
control is post status LED and as
such, the status LED is NOT affected
by the level control. See internal
adjustment section on page 6.
AMIS ZRM4 INSTALLATION & OPERATION MANUAL
5
6
OUTPUT CONTROL SECTION
5
OUTPUT LEVEL CONTROLS
These four pots control the level
of each output.
6
PRIORITY OVERRIDE
ENABLE SWITCHES
When active, these switches
allow input channel #1 to have
priority over all other inputs for
the selected output.
7
OUTPUT STATUS LEDS
Each output has a status LED
indicator. The LED is green when
signal is present on the output and
is red when the signal peak is above
0dBu (0.775v).
7