Cookson FCA Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pembuka Gerbang Cookson FCA. Cookson FCA 17 halaman. M100 firegard chain; m100 firegard crank

Halaman Cetak

1. Specification
2. Installation Instructions
3. Operator Mounting
4. Adjusting the Drive Chain
5. Wire Routing
6. Maintenance Instructions

OPERATOR MOUNTING

1. Before the operator is installed, verify that the door is properly operating and balanced.

2. Make sure the mounting plates are correctly positioned for RH or LH mounting.

3. Attach and tighten the mounting hardware to the mounting plate.

4. Tighten the operator mounting plate to the door.

5. When the operator is mounted on the bracket, be sure the door sprocket is properly aligned / in the

same plane with the operator drive sprocket before securing to the shaft.

6. The shelf or bracket must provide adequate support for the operator. Prevent play between operator

and door shaft. Permit operator to be fastened securely and with the drive shaft parallel to the door

shaft.

M100 FireGard

Chain & Crank

02/11