Cookson FKA Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pembuka Gerbang Cookson FKA. Cookson FKA 17 halaman. M100 firegard chain; m100 firegard crank

Halaman Cetak

TESTING

1. Simulate an alarm condition and see if the solenoid disengages and releases the fire door.

2. Simulate a power failure and see if the solenoid disengages and releases the fire door.

RESETTING

1. Make sure power and alarm connection is normal.

2. Operate chain or crank to open the door to the fully open position.

Note: If the power or the alarm is not normal, chain or crank operation will slip and not open the door.

MAINTENANCE INSTRUCTIONS

WARNING

Check the following items at the intervals listed:

CHECK LIST DESCRIPTION

Fasteners

Drop-test

Inspect and service whenever a malfunction to either the door or release device is observed or

suspected.

Before servicing, always disconnect power supply to the release device.

Replace fuses only with those of the same type and rating.

All replacement parts must be obtained from the door manufacturer per NFPA 80.

Testing of the FCA and FKA are independent of, and shall in no way be interpreted as an alternative

method of testing the fire alarm system, and/or any other system component employed on the fire door

or counter fire door installation. TESTING SHALL BE PERFORMED AND WITHNESSED FOR

PROPER OPERATION.

Disconnect power supply before servicing.

Check & tighten as required

Inspect door, drop-test for

proper operation and full closure

per NFPA-80

EVERY

3 MONTHS

6 MONTHS

EVERY

12 MONTHS

●

M100 FireGard

Chain & Crank

02/11