Agri-Fab 45-0356 Panduan Pemilik - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Anakan Agri-Fab 45-0356. Agri-Fab 45-0356 8 halaman. Agri-fab 3-point hitch disc cultivator parts manual
Juga untuk Agri-Fab 45-0356: Bagian Perbaikan (1 halaman)
Halaman Cetak.
.
Attach
two mast extension
straps
to the front of
the frame tray so that the bent end of each strap
points
outward.
Use two 1/2" x 1-1/4"
hex bolts
and two 1/2" Nylock hex nuts. Do not tighten
yet.
See figure
3.
At the other
end of the mast extension
straps,
attach the cross brace to the inside and two mast
sides to the outside
of the straps.
Use the two
category
1 pins, two 7/8" lock washers,
and two
7/8" hex nuts. Do not tighten
yet. See figure 3.
7/8"
HEX NUT
MAST SIDE
7/8"
LOCK WASHER
CATEGORY
1 PIN
112" NYLOCK
HEX NUT
112" x 1-1/4"
HEX
BOLT
J
MAST
EXTENSION
STRAP
TRAY
FRAME
FIGURE3
7.
.
Install a pivot pin through
the holes in the ends of
the
mast
sides
and
secure
the
pin using
the
haircotter
pin. See figure 4.
Arrange
the mast lift straps as shown in figure
4.
Assemble
the straps
and the 1-1/2" spacer
be-
tween the mast sides using a 1/2" x 3-1/2" hex bolt
and 1/2" Nylock hex nut. Do not tighten
yet.
112" NYLOCK
HEX NUT
HAIRCOTTER
PIN
PIVOT
PIN
\
1-1/2SPACER
/4
MAST LIFT
STRAP
1/2" x 3-1/2"
HEX
BOLT
FIGURE 4
.
10.
Attach the weight rack to the back of the tray frame
using a 3/8" x 1" hex bolt and a 3/8" Nylock
hex
nut. Do not tighten
yet. See figure 5.
Assemble
the mast lift straps on the outside of the
frame
tray
braces
using
two 1/2" x 2-1/4"
hex
bolts, 3/4" spacers
and 1/2" nylock hex nuts. Place
the spacer
between
the strap and the side of the
weight rack. See figure 5. Refer also to figure
6.
11. Tighten
all loose nuts and bolts.
3/8"
NYLOCK
WEIGHT
RACK
HEX NUT
_...
.--,_/
'_
/2"
NYLOCK
HEX
NUT
/
I _
1/2" x 2-1/4"
L//
I
HEX
BOLT
/
\1
3/4" SPACER
I
I
I
I
TRAY
FRAME
END OF MAST
LIFT
STRAP
FIGURE 5