AUSTRALIAN POOL EQUIPMENT PRISTINE PRI-100 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyedot Debu Kolam Renang AUSTRALIAN POOL EQUIPMENT PRISTINE PRI-100. AUSTRALIAN POOL EQUIPMENT PRISTINE PRI-100 12 halaman. Auto self cleaning

Halaman Cetak
SETTING THE TIME
Enter the MAIN MENU by pressing the [MENU] button.
Use the [▲] and [▼] buttons to
navigate the menu until the arrow
indicates that you have reached
SET TIME. Press the [ENTER]
button to enter into the settings.
Use the [▲] and [▼] buttons to set the HOURS. Be aware that the system
uses a 24 hour clock!
Press the [ENTER] button to confirm
he HOURS setting. The arrow
pointer will now move automatically
to the next line where you will be
prompted to set the MINUTES using
the [▲] and [▼] buttons once more.
Press the [ENTER] button to confirm the MINUTES setting. You will now be
automatically returned to the MAIN MENU.
Press the [MENU] button once more to exit the MAIN MENU and return to
the MAIN OPERATING SCREEN.
ADJUSTING THE LCD CONTRAST
Enter the MAIN MENU by pressing the [MENU] button.
Use the [▲] and [▼] buttons to navigate the MAIN MENU until
the arrow indicates that you have
reached ADJUST CONTRAST.
Press the [ENTER] button to enter
into the settings.
Use the [▲] button to increase
the contrast level, and the [▼] button
to decrease the contrast level.
Once you have set the CONTRAST
to a suitable level, press the [MENU]
button to save your changes and
return to the MAIN MENU.
TimerSettings
Pump Protection
Cell Cleaning
Clock (Set Time)
Pump Protection
Cell Cleaning
Clock (Set Time)
Contrast (Adj)
Page 13

SETTING THE TIMER

Enter the MAIN MENU by pressing the [MENU] button.
Use the [▲] and [▼] buttons to
navigate the menu until the arrow
indicates that you have reached
TIMER SETTINGS. Press the [ENTER]
button to enter into the settings.
The TIMER SETTINGS can be programmed to turn the chlorinator ON or OFF in one
hour segments over the course of a 24 hour day.
CLEAR SEGMENT = OFF
The chlorinator will NOT operate for
that whole hour
FILLED SEGMENT = ON
The chlorinator will operate for that
whole hour
Use the [▲] and [▼] buttons to move the pointer to the desired segment.
Press the [ENTER] button to toggle the
corresponding segment either
ON or OFF.
To the left of the screen, the time
period relating to the segment
indicated by the pointer is displayed.
If you select the first segment to be ON (as shown in the above example)
the chlorinator will turn on at 12am and switch off at 1am.
You can turn ON or OFF as many one hour segments as you wish.
Press the [MENU] button to save
changes and return to the MAIN MENU.
Press the [MENU] button once more
to exit the MAIN MENU and return
to the MAIN OPERATING SCREEN.
The example above shows the chlorinator will operate from 12am-5am and 3pm-8pm
Mode Select
Chlorine Output
TimerSettings
Pump Protection
Page 10