Australtek DASH V3.X SERIES Panduan Teknis - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Gerbang Australtek DASH V3.X SERIES. Australtek DASH V3.X SERIES 17 halaman.

DASH 3.x Series

Led Signal Code

DASH on

Packet received from DOT.

Setting IP (DHCP).

IP configured.

Wi-Fi configuration setup failed.

Updating Firmware

Normal operation.

Server is not responding.

Micro SD failed.

Losing data. Serial communication

reached its max baud rate.

http://www.dzsupervision.com

RSSI-WIFI(red)

STATUS(white)

Blinks for 1 second

every 2 seconds.

Off

Blinks for 1 second

every 5 seconds.

2 500ms blinks

every 2 seconds.

3 500ms blinks

every 2 seconds.

4 500ms blinks

every 2 seconds.

RSSI-DOT(blue)

Blinks. If packets of data

are received continuously,

this led may stay on.

POWER(green)