Austria Email PZ 1000 Syarat dan Ketentuan Umum Koneksi dan Garansi - Halaman 9
Jelajahi secara online atau unduh pdf Syarat dan Ketentuan Umum Koneksi dan Garansi untuk Pemanas Air Austria Email PZ 1000. Austria Email PZ 1000 13 halaman. Layer-buffer storage tanks
Halaman Cetak
11. There is a charge for services provided outside of the context of these guarantee conditions.
12 In order for a warranty claim to be honored by the manufacturer, the appliance must be paid for in full to the ma-
nufacturer and the claimant must have met all his obligations to his vendor in full.
13. To make claims under the applicable Austrian Product Liability Act, the following must be noted:
Any possible claims from the product liability stated above which deal with damage caused by a failure of a pro-
duct (e.g. a person receives bodily injury, health is damaged or some other bodily part is damaged by the product),
are only justified when all the prescribed measures and requirements which are needed for error-free and standard
compliant operation of the device have been fulfilled. These include, for example, the connection to the correct
operating voltage, damage caused by improper use must be avoided, etc. These requirements are all derived from
the fact that, if all regulations (standards, installation and operating instructions, general guidelines, etc.) are ob-
served, then the secondary damage would not occur from a casual error on the device or the product. In addition,
it is essential for the completion of the required documentation that, e.g. the description and manufacturing num-
ber of the buffer tank, the sales receipt and the concessionaire who performed the sale as well as a description
of the malfunction, about the examination in a laboratory of the buffer tank in question (absolutely necessary that
an expert examines the buffer tank and analyses the cause of the fault) must be supplied. To avoid any mix-up
of the buffer tank during transportation, the buffer tank must be marked with an easily legible, water-proof mar-
king (best with the address and signature of the end customer). Appropriate photographic documentation of the
extent of the damage, the installation itself as well as the fault location of the buffer tank is required. In addition,
the manufacturer reserves the right to require the submission of the required documents and devices or parts of
devices from the purchaser. A prerequisite for the provision of services resulting from product liability is that the
victim must prove that the damage was caused by the product from the product manufacturer. Claims made in
line with the Austrian Product Liability Act are only valid for the sums above the first 500 Euro part (excess). Until
all the facts and circumstances have been determined and the causal error-triggering reason has been identified,
the possible fault of the producer is expressly excluded. Failure to observe the operating and installation instruc-
tions as well as the relevant standards is considered negligence and leads to a disclaimer of liability in the area of
compensation.
The illustrations and data are not binding and may be modified without notice when technical improvements are made.
Subject to printing errors and technical changes.
9
Id.Nr.: 237734-8