4smarts 4S468447 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Aksesori 4smarts 4S468447. 4smarts 4S468447 8 halaman. Bartender powerbank, energy to go 2charge

Halaman Cetak
I. Safety instructions
EN
- Protect the device from dirt, moisture,
overheating, and extreme temperatures
and only use it in dry rooms.
- Keep out of reach of children!
- Do not drop the product and do not
expose it to any major shocks.
- Do not operate the product outside the
power limits given in the specifications.
- Do not open the device. Stop using the
device if it becomes damaged.
- Do not modify the product in any way.
Doing so voids the warranty.
- Only use the supplied AC charger to
charge the powerbank.
- Do not connect defective devices such
as charging devices to this product.
- Do not overcharge the product or allow
the battery to completely discharge.
Discharge & recharge the product at
least every 3 months.
II. Package Contents
- 4smarts power bank Bartender /Barten-
der Club /Bartender Cinema
- Power supply
- User manual
- Data cable (Bartender Cinema)
III. Technical specifications
- Capacity: 20700 mAh
- Battery type: Lithium-Ion
- Input: 12V
- Power bank´s charging time: 5 h
- Output: 4x 5V
- Weight:
0,85 kg (Bartender/Bartender Club)
0,95 kg (Bartender Cinema)
- Dimensions: 237 x 114 x 130 mm
- Memory size: 512 MB (Bartender Cinema)
IV. Compatibility/Requirements
This/these condition(s) must be complied
for the following operational functions:
- Terminal devices need to have a micro-
USB or Lightning connector. Otherwise
an additional cable, which is not included
in the scope of delivery, is required in
order to connect the terminal device to
the power bank.
6
2000 mA
2100 mA max.
V. Picture description
1.
On / off switch
2.
LED Indicator
3.
USB Type-A output
4.
Lightning connector
5.
Power supply connection socket
6.
Micro-USB connector
7.
Card compartment
8.
Top cover
9.
Data interface (Bartender Cinema)
10. Display control button (Bartender
Cinema)
11. Reset Button (Bartender Cinema)
12. Motion sensor (Bartender Cinema)
13. Display (Bartender Cinema)
14. Power Supply
15. Data cable (Bartender Cinema)
VI. Operation
6.1
Charging the power bank
- Fully charge the power bank before the
first use.
- Begin charging the power bank by plug-
ging the supplied AC charger into the
device´s power connection (5) and into a
power outlet (100 - 240 V).
- Charging begins and ends automatically
- During the charging process the LEDs
(2) flash on and off from left to right.
- As soon as the charging is finished, the
LED indicator (2) turns off.
6.2
Charging terminal devices
- Briefly press the ON/OFF button (1) to
switch the device on.
- Use the powerbank´s micro-USB
connector (6) or its Lightning connector
(4) to connect it with your terminal device
and to start the charging process.
- Additionally you can use external USB
Type-A cable to connect your terminal
device to one of the power bank´s USB
Type-A outputs (3) in order to start the
charging process.
- Charging begins automatically
- Charging stops automatically when all
terminal devices connected to the power
bank are fully charged.
- Use your terminal device´s internal
battery indicator to check its current
charging status.