AUSTRIALPIN DYNA.MIT Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Keselamatan AUSTRIALPIN DYNA.MIT. AUSTRIALPIN DYNA.MIT 16 halaman.
Halaman Cetak
WARNING: The use of our products
can be dangerous.Our products may only
be used for their intended purpose. They must
particurlarly not be used for lifting as specified
in EU directive 2006/42/EC. The customer is
responsible that the user has been trained in
the safe use of the product and in accompanying
safety precautions. Be aware of the fact that
the product can cause damage if wrongly used,
stored, cleaned or overloaded. Check national
safety regulations, industry recommendations
and standards for local requirements. The
product accompanied by this set of instructions
is type-examined, CE-marked to state
conformity with the European regulation (EU)
2016/425 on Personal Protective Equipment
(PPE) and meets the European standard(s)
given on the product label. The product does
however not comply with any other standards
unless explicitly stated. AUSTRIALPIN is not
responsible for any direct, indirect, or incidental
consequences/damage occurring during or
after the use of the product and resulting
from any improper use, especially caused by
incorrect assembly of the equipment.
Service Life
CORE.DY: The product's service life may be up to
2 years from the day the product was first taken
out of the undamaged light-protected package,
and the product must be retired after no later
than 2 years of having been used. It is assumed
that the product is taken out of the package at
the time of the purchase. We recommend that
you keep the original sales receipt which is the
proof of purchase. The theoretically possible
total product life (correct storage prior to first
removal + period of use) is limited to 5 years
from the date of manufacture.
DYNA.MIT: Only if the rope is rarely used (one
week a year) and stored correctly can its useful
life be up to 5 years from date of manufacture.
Actual useful life depends solely on the
condition of the product which is influenced
by various factors (see below). The lifespan
could be as short as first use under extreme
conditions, or even less if damaged (e.g. in
transit) prior to first use.
Mechanical wear or other influences such as
the effects of sunlight seriously reduce useful
life of this product. Bleached or rubbed fibres,
discolouring and hardening are a sure sign that
the product should be withdrawn from use.
We expressly refrain from making any general
statements about the useful life of the product,
since it depends on a variety of factors such
as UV light, the type and frequency of use,
treatment, the effects of weathering such as
snow, the environment such as salt, sand,
battery acid, and many more factors. Aramides
and Dyneema® are not UV-stable (incl.
sunlight). Therefore, keep the product in a
place where it is protected from UV radiation.
In addition, be sure to replace it immediately
when discoloration, hardening, or yarn damage
appear.
IN GENERAL: If for whatever reason, no matter
how insignificant, the user is not certain that the
product satisfies the requirements, it must be
withdrawn from use and inspected by an expert.
Any product that shows signs of wear should be
withdrawn.
The product must be replaced without fail after
a fall!
Cleaning and Storage
The equipment must be stored:
- dry,
- at room temperature (15 – 25°C),
- protected from the light (UV radiation, welding
equipment,...),
- clean, away from chemicals (liquids, vapours,
gases,...) and other aggressive conditions,
- protected from sharp-edged objects.
To clean, rinse the rope with lukewarm water