austriamicrosystems AS5030 Panduan Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Motherboard austriamicrosystems AS5030. austriamicrosystems AS5030 8 halaman. 8 bit programmable high speed magnetic rotary encoder
Halaman CetakAS5030 8 bit high speed magnetic rotary encoder
Demoboard Operation Manual
2 AS5030 Software
2.1
Getting Started
This software allows you to become familiar with the principle of the AS5030 sensor. In order to get started, you
need:
•
The AS5030 Demo Software installer, downloadable on the Austriamicrosystems website
•
Win-XP® or Windows Vista® operating system
•
one free USB slot on your PC to connect the demoboard
2.2
Installing the Software
The installation process consists of three steps:
•
Unzip the Demoboard software installation AS5030_DemoBoard_Software_Setup.zip in any local
directory
•
Execute the .exe setup file
•
Follow the instructions on the screen
The demoboard and the software don't need any other files or drivers to be installed on the computer.
2.3
Software Usage
Before starting the software the board needs to be connected to the PC.
After starting the software, two modes can be selected: SSI-Readout and OTP.
For both modes, the following functions are present:
USB:
Connected/No connection. If the demoboard is correctly connected to the PC, the software should find
immediately the demo board.
Onboard / External:
Switch the actual AS5030 sensor from the on-board one (by default), to an external AS5030 connected
on the "external AS5030 header" (see Figure 1).
Revision 1.0, 29-May-08
Figure 3: USB Connect
www.austriamicrosystems.com
Page 2 of 8